Suavinex Zero Zero bottle 270 ml Deep flow M

-Suavinex Zero.Zero -feeding bottle -capacity 270 ml -Deep color variant -M flow nipple -suitable from 3 months -new condition The Suavinex Zero.Zero bottle in Deep has a capacity of 270 ml and an M flow nipple. The M flow is designed for thin liquids for babies aged 3 months and up. The inner pouch contracts as the baby sucks, as designed in the Zero.Zero system. Fill the pouch only after placing it inside the bottle and attaching the base. The nipple has a directional position: the shorter side should be at the top and the longer side at the bottom. Disassemble the product for cleaning and use only under adult supervision. Care and safety Verified translation of the manufacturer's instructions into Polish: Before each use, including the first, wash the nipple and bottle parts thoroughly and separately, then sterilize them. Separate all parts before sterilizing. Wash the bottle with warm, soapy water or in the dishwasher; do not use alcohol-based disinfectants. Wash the pouch with warm, soapy water; you can turn it inside out to make cleaning easier. After washing, return it to the correct position: shiny side facing inward, THIS SIDE OUT text facing outward, and leave it to dry. The manufacturer advises against using a bottle brush to clean the flexible pouch, which wrinkles when touched. Only parts that come into contact with milk require sterilization. Suitable sterilization methods: boil for 5 minutes, fully submerging the pouch in water — this method must be used before first use; microwave/steam sterilizer, following its instructions; cold sterilization system. Leave the parts to cool and squeeze the water out of the nipple. Do not sterilize in a pressure cooker or autoclave. Do not exceed the recommended time and temperature, as this may damage the bottle. Do not put more bottles in the sterilizer than the manufacturer recommends or force them in. Do not use harsh detergents, solvents, alcohol-based or antibacterial products. When using a dishwasher, use only the top rack and a temperature no higher than 60°C. Assembly: slide the nipple base into the ring and fit the bottom edge of the nipple inside the thread. Check that the edge fits correctly all the way around. Remove the bottle base, fold the pouch in half and insert it from the top or bottom. Important: the pouch capacity must match the bottle's maximum capacity. If you turned the pouch inside out to wash it, return it to the correct position with THIS SIDE OUT facing outward and the shiny side facing inward. Rest the pouch neck on the bottle neck and check that the pouch is not wrinkled. Attach the base, then screw the ring and nipple assembly onto the bottle with the pouch inside. The base must be attached before filling with milk to prevent spills and avoid touching the pouch during feeding, which could interfere with its function. Place the inner lid, which prevents leaks during transport or when mixing formula, on the pouch before screwing on the ring, with the Suavinex logo facing upward. Fill the pouch with milk only after installing it in the bottle. During feeding, the shorter side of the nipple, from tip to base, should be at the top and the longer side at the bottom. For comfort, hold the bottle in the middle. The pouch wrinkling as the baby sucks is a normal feature of the system. To check how much liquid remains, loosen the ring slightly so the pouch can unfold again. The bottle fits Suavinex breast pump connectors, allowing you to pump milk directly into it. Food colorings may stain the parts. Rinse thoroughly with water after each use. Do not store in damp places or at high temperatures. Before heating in a microwave, remove the cover, ring and nipple; the pouch must contain liquid. Take special care: always stir heated food to distribute the heat evenly and check the temperature before feeding. When heating in a Suavinex bottle warmer, first remove the bottle base and always use 80 ml of water. Check the product regularly; stop using it if it is damaged. Use as intended and according to the manufacturer's recommendations. Check the product regularly; stop using it if it is damaged. Manufacturer's warnings — verified translation into Polish For your child's safety and health. WARNING! Continuous and prolonged sucking of liquids causes tooth decay. Tooth decay can also occur with sugar-free liquids if a child uses a bottle for long periods during the day, especially at night when saliva production is lower, or uses it as a pacifier. Always check the temperature of the food before feeding to prevent burns from food that is too hot. Discard at the first signs of damage or weakness. Before each use, carefully inspect the nipple/teat and pull it in all directions to prevent choking. Keep unused parts out of children's reach to prevent choking or fingers getting trapped. Never attach cords, ribbons, shoelaces or loose clothing. The child may suffocate; a cord may wrap around their neck. Never use a feeding nipple as a pacifier. This may lead to tooth decay. Always use under adult supervision. Leaving a child with a bottle unattended may lead to accidents if the child falls or the product comes apart. Keep the nipple away from direct sunlight and sources of heat; do not leave it in a sterilizing solution longer than recommended, as this may damage the nipple. Do not let the child run or walk while drinking. FAQ What is the bottle's capacity? 270 ml. What flow rate does it have? Medium M, for thin liquids from 3 months. How should the nipple be positioned during feeding? With the shorter side facing up and the longer side facing down, as instructed by the manufacturer. Specifications Shipping time: 24 hours Safety documents Manufacturer's instructions and warnings — Suavinex Zero.Zero: https://cloud.communication.suavinex.com/documento-seguridad-biberones-zerozero