{"product_id":"jane-basic-skladana-barierka-ochronna-do-lozka-90-cm-szara","title":"Jané Basic folding bed guard rail 90 cm gray","description":"-Jané Basic\n-Bed safety rail\n-rail length: 90 cm\n-folding design\n-removable cover with mesh panel\n-fits under the mattress with adjustable straps\n-gray finish C01\n-ex-display condition, very good; packaging may be damaged or replaced\n\nJané Basic is a folding 90 cm bed safety rail in gray finish C01. The mesh panel lets you keep an eye on your child, and the removable cover is easy to care for. Supports that slide under the mattress and adjustable straps keep the rail stable against the side of the bed. The folding mechanism makes it easier to access the mattress.\n\nThis model is intended for children from 18 months to 5 years old who can get into and out of bed on their own. It is not a substitute for a cot. The instructions specify beds measuring 80 × 190 cm to 150 × 200 cm and mattresses 15–30 cm thick; the top edge of the rail must extend at least 16 cm above the mattress. Leave a gap of at least 250 mm between each end of the rail and the corresponding end of the bed. Do not use if the sleeping surface is more than 600 mm above the floor.\n\nCare and safety\nThe cover can be removed and hand-washed or machine-washed at a low temperature. Clean the metal tubes with a damp cloth. Check the assembly and locking mechanisms carefully before using again.\n\nBefore first use, we recommend checking the manufacturer's instructions, age recommendations, cleaning guidelines, and compatibility with any other accessories.\n\nManufacturer's warnings — verified English translation\nFolding bed rail with removable cover\nWARNING\n1. Do not use the rail for children under 18 months or over 5 years old. Use it only when the child can get into and out of bed on their own.\n2. The rail is not a substitute for a cot, as it does not provide the same level of safety.\n3. Use with beds measuring 80 × 190 cm to 150 × 200 cm and mattresses 15 to 30 cm thick.\n4. After installation, check that the rail is properly fitted and stable.\n5. Do not use on a sleeping surface more than 600 mm above the floor. Never use on a bunk bed, a child's bed, or any other bed that does not comply with these instructions.\n6. To prevent injury, follow the instructions for folding, installing, and using the rail carefully.\n7. Do not leave the child without adult supervision while installing or removing the rail.\n8. Periodically check that the rail is correctly and securely fitted and that the locking mechanisms are firmly secured. Check the overall condition of the rail, especially the safety of the locking mechanisms and hinges.\n9. Keep away from fire.\n10. Do not use accessories not approved by JANÉ. Purchase additional and replacement parts only from the manufacturer.\n11. Do not use if the fasteners are missing or are not securely attached to the bed or mattress and the rail.\n12. The rail is suitable for all types of bed bases.\nIMPORTANT: KEEP FOR FUTURE REFERENCE.\nRead the entire instruction manual before folding and installing the rail. If you sell or give away the product, pass the manual on to the new owner. Before installation, check that all the parts listed in the instructions are present.\nThe rail complies with BS 7972:2001+A1:2009. Made in China. Designed in Spain.\nASSEMBLING THE FRAME\nThe color and design shown in the following assembly diagrams may differ from the model purchased. Before assembly, check that all the parts shown in the instructions are present.\n1. Fold or connect the top tube A.\n2. Thread one end of the connected bridge-shaped tube through the cover. Take care to ensure that the JANÉ logo is on the outside.\n3. Connect the side tubes C with the folding mechanism to both ends of the top tube, and finish pulling the cover on.\n4. Connect the two parts of the bottom tube D.\n5. Thread the tube through the bottom of the cover.\n6. Connect the tube to the side tubes by inserting the connecting pins.\n7. Fit both stabilizing supports E onto the side tubes by inserting the connecting pins.\n8. Place the rail on the floor and fold down each joint that forms the side corners.\nREMOVAL AND CLEANING\n1. Remove the rail from the bed.\n2. Disassemble it by reversing the assembly steps.\n3. The cover is removable. Take it off by reversing the assembly steps. Hand-wash or machine-wash at a low temperature.\n4. Clean the metal tubes with a damp cloth.\nATTACHING TO THE BED\nKeeping the rail upright, slide the supports under the mattress. W If necessary, lift the edge of the mattress. Slide the rail all the way in so it fits snugly against the side of the mattress.\nAttach the oval plate at the opposite edge of the mattress, on the side away from the rail. Adjust the strap length using the buckle. For stability, the strap must be fastened tightly and securely.\nWARNING: To prevent suffocation, after installation leave a gap of at least 250 mm between each end of the bed and the corresponding end of the rail.\n1. The gap between the end of the rail and the headboard must be at least 25 cm (10 inches).\n2. The rail must fit snugly and securely against the side of the mattress, and all fasteners must be in place.\n3. The top edge of the rail must extend at least 16 cm (6.3 inches) above the top edge of the mattress.\nUnfold the supports with straps C and place them under the mattress, above the bed base. Measure the width of the mattress and adjust the safety straps accordingly. Attach the oval section on the opposite side, across the width of the mattress. Adjust the strap length using the buckle.\nFOLDING\nTo lower the rail, lift the handles on both sides to unlock it. When the child is asleep, lift both ends of the rail until it locks into place with the side joints to prevent the child from falling out of bed.\n\nFAQ\nWhat age is the rail intended for?\nFrom 18 months to 5 years old, only if the child can get into and out of bed on their own. It is not a substitute for a cot.\n\nWhich mattresses does it fit?\nThe instructions specify a thickness of 15–30 cm. At the same time, at least 16 cm of the rail must extend above the mattress; all installation requirements must be met.\n\nIs the cover removable?\nYes. It can be removed and hand-washed or machine-washed at a low temperature, in accordance with the instructions.\n\nSpecifications\nShipping time: 24 hours\n\nSafety documents\nOfficial Jané Basic instructions: https:\/\/cdn.shopify.com\/s\/files\/1\/0995\/7549\/7030\/files\/Bed_Rail_Basic.pdf?v=1788444697","brand":"Jané","offers":[{"title":"Default Title","offer_id":54669428457819,"sku":"B0C4TFKRKN","price":69.5,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/8019\/0555\/files\/dbc7f321181677f0b51c7bcda9813d6c.jpg?v=1794066609","url":"https:\/\/outletbaby.com\/en\/products\/jane-basic-skladana-barierka-ochronna-do-lozka-90-cm-szara","provider":"OutletBaby","version":"1.0","type":"link"}