{"product_id":"babygo-booster-isize-czarne-siedzisko-podwyzszajace-do-samochodu","title":"babyGO Booster iSize Black Car Booster Seat","description":" -babyGO Booster iSize\n-Child car booster seat\n-For children 125–150 cm tall\n-Three-point seat belt\n-Black version 3505\n-Contoured armrests\n-new condition\n\nThe babyGO Booster iSize in black, version 3505, is a car booster seat for children 125–150 cm tall. Its purpose is to raise the child to the correct height and help ensure that the adult three-point seat belt fits properly. The backless design features armrests and marked belt guides.\n\nPlace the booster seat facing forward, as close as possible to the vehicle seat back. Route the lap belt as instructed, through the area beneath the armrests. This model requires an approved three-point seat belt; do not use it with a two-point belt. Before installation, check the vehicle manual and the approved seating position.\n\nThe black cover protects the contoured seat and armrests. The cover is essential to the seat’s protective function, so do not use the seat without it or with a cover other than one recommended by the manufacturer. It can be removed for cleaning according to the care label. For everyday care, wipe the belt and plastic parts with a damp sponge, and wash the cover according to the manufacturer’s instructions.\n\nBefore every journey, check the position of the belt and buckle, and make sure the child has not undone the buckle. Secure loose items and luggage. All passengers must wear seat belts. Never leave a child unattended, and take frequent breaks on longer journeys.\n\nCare and safety\nWash the removable cover according to the care label at 30°C. Do not bleach, iron, or tumble dry. Clean the belts and plastic parts with a mild detergent and warm water.\n\nBefore first use, read the manufacturer’s instructions, age recommendations, cleaning and maintenance guidelines, and any compatibility restrictions.\nFor products intended for babies and young children, check their condition regularly and stop using them at the first signs of damage or excessive wear.\nIf a product is available in multiple colors, sizes, or versions, treat the photo and packaging label as final confirmation of the specific variant before publishing the listing.\n\nSelected manufacturer warnings — verified English translation\nWARNING! Read the instructions carefully before use and keep them for future reference.\n\nSelected manufacturer warnings — verified English translation\n• Ensure that the instructions can be kept with the child restraint throughout its service life, or in the vehicle manual in the case of built-in restraints.\n• Periodically check that the child has not undone the car seat buckle.\n• Do not modify or adapt the product by adding new attachments without prior approval from the relevant authority. Making unauthorized changes or failing to follow the installation instructions is dangerous.\n• Follow the manufacturer’s instructions carefully when installing the car seat.\n• Do not use the child restraint without its cover.\n• Do not replace the cover with one other than that recommended by the manufacturer, as it is an integral part of the child restraint’s performance.\n• The car seat and belts may be damaged in a severe impact. Replacement is therefore recommended.\n• Do not leave children unattended in child restraints.\n• Always make sure there are no unsecured objects in the car, especially on the rear shelf, that could injure passengers in an accident.\n• Take frequent breaks on long journeys. Children tire easily.\n• Never use a second-hand car seat. It may have structural damage that makes it extremely dangerous.\n• Make sure all passengers are wearing seat belts: in an accident, they could hit and injure the child.\n• The importer is not responsible for improper use of the product.\n\nSelected manufacturer warnings — verified English translation\nWARNING! This product is suitable for use only in approved vehicles equipped with three-point seat belts approved in accordance with UN\/ECE Regulation No. 16 or equivalent standards.\n\nSelected manufacturer warnings — verified English translation\nWARNING! If a child is secured in a vehicle seat using only a two-point belt, they may suffer serious or even fatal injuries. Never use with a two-point belt.\n• Do not install the car seat on the front passenger seat with an active airbag, as deployment could cause death or serious injury. Always install the car seat on the rear seats.\n• Do not install the car seat on vehicle seats that face backwards or sideways to the direction of travel. Use the illustrations in the instructions when installing.\n\nSelected manufacturer warnings — verified English translation\nDaily maintenance\n1. Check the car seat periodically during everyday use. Replace the car seat after an accident.\n2. Store the car seat in a dry, well-ventilated place to prevent dampness and mold.\n3. Wipe dusty belts and plastic parts with a damp sponge and leave them to air-dry.\n4. If food or drink accidentally gets on the buckle, remove the belt from the car seat, rinse it gently with warm water, and leave it to air-dry.\n5. When cleaning the entire car seat cover, follow the washing instructions below.\n\nSelected manufacturer warnings — verified English translation\n• The cover is a safety component. Never use the car seat without it.\n• The cover can be removed and washed at 30°C. Line dry only.\n• Do not put your child’s safety at risk by using a different replacement cover: it may prevent the car seat from protecting your child as intended.\n• Belts and plastic parts can be washed with a mild detergent and warm water.\n• Do not use chemical scouring agents, bleach, or corrosive products.\n\nSelected manufacturer warnings — verified English translation\n• Do not bleach.\n• Do not tumble dry.\n• Do not iron.\n• Wash at 30°C.\n\nSelected manufacturer warnings — verified English translation\nRemoving and fitting the cover\nRemove the cover by holding the booster seat with one hand and pulling the cover with the other, then wash it carefully according to the instructions on the attached label.\nNOTE: Follow the instructions on the cover label.\n\nSelected manufacturer warnings — verified English translation\nThe seat is approved for carrying children 125–150 cm tall.\nThis is a booster seat designed to ensure a proper fit for an adult three-point seat belt.\nIt must only be used facing forward.\nIt is suitable only for approved vehicles with seat belts approved in accordance with ECE R16 or equivalent standards.\n\nFAQ\nWhat height is the Booster iSize 3505 designed for?\nThe instructions specify a range of 125–150 cm. The seat is designed to ensure a proper fit for an adult three-point seat belt.\n\nCan the seat be used with a two-point belt?\nNo. An approved car seat belt complying with ECE R16 or an equivalent standard is required.\n\nSpecifications\nDispatch time: 24 hours","brand":"BabyGo","offers":[{"title":"Default Title","offer_id":54669428982107,"sku":"B0CTMX6Y5R","price":74.95,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/8019\/0555\/files\/904b0b3f8185fb354b486ca09a12ffc9.jpg?v=1794066627","url":"https:\/\/outletbaby.com\/en\/products\/babygo-booster-isize-czarne-siedzisko-podwyzszajace-do-samochodu","provider":"OutletBaby","version":"1.0","type":"link"}